STHDBTRX: Extend the HDMI signal from ST424HDBT 4x4 HDMI matrix switch 

over CAT-5/6 cable, with IR control 

• 230 feet (70m) HDMI extension over CAT-5/6 cabling
• IR extender/receiver cables included
• Mounting brackets included
• Support for video resolution up to 1920x1200/1080p

This HDBaseT receiver works with the ST424HDBT HDMI matrix switch to extend an HDMI audio/video source up to 230 feet (70m) over CAT-5e/6 cabling. One STHDBTRX receiver unit is required for each individual remote display.

Together with the ST424HDBT, the CAT-5 HDMI receiver works to create a digital signage solution that eliminates the expense and hassle of running multiple devices with an HDMI matrix switch and extender in one clutter-free system. Because the signal is extended using standard CAT-5e/6 cables with RJ45 connectors, you can use your existing cabling infrastructure, without the additional cost of special cabling or connectors.

For remote source operation, the HDMI receiver can also extend an infrared signal from a remote control to operate either the display or the video source from either side or system, using the included IR extender and receiver cables.

Applications
• Connect 4 different HDMI sources to 4 different displays, in different locations around a large building such as a shopping center, school, or hospital
• Choose which video sources are displayed and switch between sources at any time
• Place the displays in a convenient viewing area, while the HDMI source equipment is placed elsewhere in a separate, secured environment

The StarTech.com Advantage
• Cost-saving installation, with non-proprietary CAT-5e/6 cabling
• Eliminate clutter, and reduce failure points using an all-in-one HDMI switch, splitter, and extender, with mounting brackets included
• Hassle-free operation with serial, Ethernet, or IR control

Included in Package
1x HDMI Receiver unit
1x Mounting brackets
1x IR kit (transmitter/receiver)
1x Universal power adapter
1x Quick install guide

Required Link Cable
1x CAT-5/6 cables