XTENDEX Low-Cost HDMI over Gigabit IP Extender - Model No. ST-IPHD-POELC-V4 - KVMGalore® | Tech Solutions Made Easy™
NTI
  • MSRP $310.00
  • Savings$26.00
  • Our Price $284.00
FREE GROUND SHIPPING!
For additional views click on an image below
Image 1 of 5 - XTENDEX Low-Cost HDMI over Gigabit IP Extender, Local unit view
Image 2 of 5 - XTENDEX Low-Cost HDMI over Gigabit IP Extender, Remote unit view

Image 3 of 5 - Point-to-point connectio view
Image 4 of 5 - Point-to-many connections using an unmanaged network switch. For a point-to-many connection, a standalone network with an unmanaged network switch, hub, or router can be used instead of a managed network switch. It is not recommended to use any other network devices on this standalone network as it may cause a degradation in performance. Supports up to 253 receivers. view

Image 5 of 5 - Many-to-many connections using a managed network switch. Support for multiple transmitters requires a managed network switch with VLAN support. NOTE: The many-to-many configuration is not compatible with Cisco 2960 switch. view

XTENDEX Low-Cost HDMI over Gigabit IP Extender

Model No. ST-IPHD-POELC-V4 Out of stock

Local Unit
• One female HDMI-A port for source connection
• One female 1000Mbps RJ45 port for sending high definition video/audio signals
• One female 3.5mm port for IR emitter (included)
• IR frequency range: 20 to 60 Khz
• Supported input resolutions: 480i @ 60Hz, 480p @ 60Hz, 576i @ 50Hz, 576p @ 50Hz, 720p @ 50/60Hz, 1080i @ 50/60Hz, 1080p @ 50/60Hz
• Encoding delay: 80 ms latency
• Supports HDCP 1.4

Remote Unit
• One female HDMI-A port for HDTV or computer display
• One female 1000Mbps RJ45 port for receiving high definition video/audio signals
• One female 3.5mm port for IR receiver (included)
• IR frequency range: 20 to 60 Khz
• Supported output resolutions: 480p @ 60Hz, 576p @ 50Hz, 720p @ 50/60Hz, 1080p @ 50/60Hz
• Supports embedded digital audio through HDMI compatible TVs or audio receivers
• Supports HDCP 1.4

Power
• Power over Ethernet: With a switch that supports power over Ethernet, a power supply is not  required at the local or remote unit
• Compliant with IEEE 802.3af, class 0 standards
• Input: 100 to 240 VAC at 50 or 60 Hz via AC adapter (not included)
• Country-specific AC adapter sold separately (PWR-SPLY-IPHDPOELCV4)
• Output: 5VDC, 3.0A
• Local unit power consumption: 4.5W
• Remote unit power consumption: 3.5W

Distances
• 394 feet (120 meters) over CAT-6/6a/7 cable
• 328 feet (100 meters) over CAT-5e cable

Cables (not included)
• Use HD-xx-MM cable to connect an HDMI source or display up to 50 feet
• Use HD-ACT-xx-MM 4K HDMI Active Cables to connect an HDMI source or display up to 100 feet
• Use DP-HD-xx-MM cables to connect a DisplayPort source up to 15 feet away from the transmitter
• Use DVI-HD-xx-MM cable to connect a DVI source up to 5 meters
• Use CATx solid or stranded straight through cable for TIA/EIA-568B wiring terminated with standard RJ45 connectors
• Extend to 394 feet (120 meters) over CAT-6/6a/7 cable
• Extend to 328 feet (100 meters) over CAT-5e cable

Environmental
• Operating temperature: 32 to 140°F (0 to 60°C)
• Storage temperature: -4 to 158°F (-20 to 70°C)
• Operating and storage relative humidity: 0 to 95% non-condensing RH
Regulatory approvals: CE, FCC, RoHS

Dimensions
• W x D x H: 4.44 x 3.71 x 0.94 in. (113 x 94 x 24 mm)

  • Full-HD 1080p
  • HDCP
  • HDMI
  • RoHS
 

Listed below are additional products to consider which are compatible with XTENDEX Low-Cost HDMI over Gigabit IP Extender. These items may be required to complete your system.

XTENDEX Low-Cost HDMI over Gigabit IP Receiver

1) XTENDEX Low-Cost HDMI over Gigabit IP Receiver

    Model No. ST-IPHD-R-POELC-V4

$142.45

MSRP: $155.00 - You save $12.55

NTI
 

2) 5V 3A Power Supply

    Model No. PWR-SPLY-IPHDPOELCV4

$24.99

MSRP: $25.00 - You save $0.01

NTI
Comparing