Inputs
2x RJ-45 sensor ports
2x RJ-45 expansion ports, 115.2K BPS data transfer rate
1x USB 2.0 modem port
4x Video ports
2x Finger-print ports (when using finger-print readers it is recommended that only x2 video ports are enabled)
2x Wiegand 26 ports
4x PTZ 2-pin controllers
• Internal microphone
• Analog audio in: 2.5 mm jack
• RS485, 2-Pin terminal box (used for Modbus)

Outputs
• Configurable output signals (0VDC/5VDC) on any of the 2 RJ-45 sensor ports
• Internal speaker out
• External analog speaker out, 2.5 mm jack
• Analog microphone out, 2.5 mm jack for modem application
• Door control port

Optional Expansion Boards
• 8-port intelligent sensors module (E-Sensor8)
• 16-port dry contacts module (E-opto16) (maximum of 500 sensors)
• Cabinet control unit (DCU) (up to 25 per chain)
• Extendable up to 1,000 feet
• Expansion modules are daisy chainable

Video
• HD digital 4x AKCP high definition digital camera USB input (320x240 or 640x480 resolution)
• 4x PTDC controller ports

Operations
• Connectivity: Ethernet 10/100 Mbps
• Optional internal 3G/4G modem
• CPU: AKCP i.MX25 Processor
• 128 MB on-board NAND flash
• HC SD memory slot on-board (up to 16GB)
• Simultaneous functionality between expansion ports and RS485 port threshold status

LEDs
• Power
• Connectivity
• Sensor online and threshold status
• Door status

Power
• External: 12 VDC 3A power adapter
• Input Voltage: 100V~240V, 1A
• Power Consumption: 5.025 Watt, 0.67A

Physical
• Dimension: 8.5 x 5.43 x 1.80 in.
• Weight: 2.2 lb (1 kg)
• Mounting: 1U rack-mount
• Compatible with AKCP's DIN and rack mount trays

Environment
• Operating Temp.: -35° ~ +55°C
• Humidity: 20% ~ 80% (Non-Condensing)
• MTBF: 400,000 Hours

Note: Requires AKCPro Server for access-control and sensor-port configurations