Wallit Incline, 8U - Model No. RCT-WI8 - KVMGalore® | Tech Solutions Made Easy™
Rackit
  • MSRP --
  • Savings--
  • Our Price $169.00
For additional views click on an image below
Image 1 of 9 - Wallit Incline, 8U shown with optional 1U brackets mounted to the rack's top. view
Image 2 of 9 - Offering a 12" depth allowance, Wallit Incline provide 4U (shown) or 8U rack space for mounting patch panels, network and communication equipment on its pair of #10-32 pre-tapped front mounting rails (4U model shown). view

Image 3 of 9 - Wallit Incline, 8U shown with optional 1U brackets mounted to the rack's top. view
Image 4 of 9 - An integrated positive stop prevents Wallit Incline's frame from being opened more than 90 degrees to avoid causing damage or strain to your equipment and connections. view

Image 5 of 9 - When mounted both on top and below that rack, Wallit Incline's cover accessory turns it to become a fully-enclosed wall-mount rack, preventing dust and debris from settling on the equipment (4U model shown with optional cover mounted to the rack's top and optional 1U brackets mounted to the rack's bottom). view
Image 6 of 9 - Wallit Incline cover's rear cut out provides an entrance for cable routing (4U model shown with optional cover mounted to the rack's top and optional 1U brackets mounted to the rack's bottom). view

Image 7 of 9 - Wallit Incline, 8U, side view. A latching mechanism on both sides securely holds Wallit Incline's frame in a closed position. view
Image 8 of 9 - Designed for patch panels and network gear that require easy access to the back of the equipment, the Wallit Incline's tilting rack-mount frame swings down and stops at 90 degrees giving installers full access to the rear of the mounted equipment (4U model shown with optional 1U brackets mounted to the rack's bottom). view

Image 9 of 9 - Cable-access knockouts on either side of Wallit Incline offer ample cable routing, while rear lacing bars at the rear of the rack allow for excess cabling to be secured with the use of optional RackiTies. view

Wallit Incline, 8U

Model No. RCT-WI8 In stock

Rack-Mounting
• 19" EIA 310-D compliant
• Height: 14"
• Depth: 12"
• Weight capacity: 75 lbs.

Rack-Mount Frame
• Width: 19.875"
• Position: 2.125" from the bottom

Cable Management
3x laser knockouts, 2.375" diameter on each side, 3" (on center) from rack's back
1x rear lacing panel at the rack's back, on each side, with 28x lacing slits, ¾" long

Physical
• Width: 22"
• Height: 15½"
• Depth: 12.375"
• Depth with open frame: 24"
• Weight: 14.3 lbs.

Wall-Mount Key Holes
• Four (4), one on each corner
• 3" from the rack's sides
• 1" from the rack's top/bottom

  • RoHS
  • TAA
 

Listed below are additional products to consider which are compatible with Wallit Incline, 8U. These items may be required to complete your system.

#10-32 Mounting Screws, Black

1) #10-32 Mounting Screws, Black

    Model No. RCT-MS1032B

$7.00

 

Rackit
#10-32 Mounting Screws, Zinc

2) #10-32 Mounting Screws, Zinc

    Model No. RCT-MS1032Z

$6.00

 

Rackit
#10-32 Self-Tapping Mounting Screws, Black

3) #10-32 Self-Tapping Mounting Screws, Black

    Model No. RCT-MS1032STB50

$7.00

 

Rackit
#10-32 Self-Tapping Mounting Screws, Zinc

4) #10-32 Self-Tapping Mounting Screws, Zinc

    Model No. RCT-MS1032STZ50

$6.00

 

Rackit
Comparing