E-DI16DO16: ENVIROMUX digital input/output expander 

adds 16 digital inputs and 16 digital open-collector outputs to ENVIROMUX 2D/5D/16D 

Interfaces with the ENVIROMUX 2D/5D/16D via the RJ45 sensor port.

Digital Inputs
• 16 screw terminal pairs for connecting dry contact devices
• One screw terminal pair for tachometer; 0 to 255 Hz
• Accepts 26 to 16AWG wire
• Potential free
• Voltage range: 0 to +36VDC
• Over-voltage surge protected

Digital Outputs
• 16 screw terminal pairs for open-collector outputs
• Accepts 26 to 16AWG wire
• Rated sink current: 500 mA per output
• +5VDC, 22kΩ pull-ups
• Voltage range: 0 to +24VDC
• Over-voltage surge protected

Control via SNMP
• Requires read-write community configuration
• Digital inputs are fixed values (not writable) while open-collector outputs are writabl
• Locate OIDS using a MIB browser

Features and Benefits
• Supports CAT-5/5e/6 cable up to 500 feet (152.4 m)
• Compatible with and powered by ENVIROMUX 2D/5D/16D
• Compatible with E-FSC Fiber Converter/Extender (used to extend sensor up to 1.2 miles (2 km) from the ENVIROMUX unit)