VGA-EDID-EMLTR-LC: Emulates a VGA display by providing EDID to the VGA source

• Headless operation
• Video pass-through
• Resolution up to 1080p/WUXGA

The Low-Cost VGA EDID Emulator simulates the presence of an attached VGA display to a VGA video source. The built-in EDID table stores and reproduces resolutions up to 1920x1200 (WUXGA) and 1080p at 60Hz.

When used with EDID-REC-VDH EDID Recorder (sold separately), the EDID of a desired VGA display will be copied and stored to the emulator. 

Features and Benefits
• Emulates a VGA display (sink device) by providing EDID to the VGA source device from the emulator's internal memory
• Supports HDTV resolution up to 1080p, and up to 1920x1200 (WUXGA)
• Emulation mode: provides EDID to the VGA source device from the emulator's internal memory (only VGA-EDID-EMLTR-LC is necessary for this function)
• Supports headless operation - no monitor attached to source
• The selectable resolutions are dependent on the computer's graphics card
• Learning mode requires EDID-REC-VDH EDID Recorder (sold separately): store a display's EDID for later use
• Pre-programmed with many standard resolutions with native set to 1280x720 @ 60Hz
• Requires EDID-REC-VDH EDID Recorder (sold separately) to program other resolutions to the emulator
• LED indicators provide signal status information
• Ideal for resolving signal handshaking problems between a source and a display, and for remote desktop access to a headless computer
• Ensures that the EDID is not lost in connections between devices such as switches, splitters, and extenders

Need help? Call KVMGalore at 1-800-636-3434, or submit your question on KVMGalore HelpCenter.