Power
• Input Voltage: 100V~250V AC, 1 phase
• Current: 16A
• Power source: Powered by the sensorProbe+ monitoring appliance - no additional power needed
• Power Consumption: Typical 800 mWatt, 160 mA; Peak 1.75 Watt, 350 mA

Power Measurements
• Voltage (V)
• Current (A)
• Active Power (kW)
• Total Active Energy (kWh)
• Leakage current (A)
• Power Factor

Switching Relay
• Optional Latched Relay
• Contacts rating : 40 Amp
• Mechanical Life : 1 10^7 times
• Electrical Life : 3 10^4 times
• Class B

Status Indication
• LED indication for power
• LED Relay status (with optional relay)

Operations
• Sensor Count: 5
• Sensor Count with Optional Latched Relay: 6
• Sensor Count with Optional Cabinet Temperature Thermal Map: Additional 9
• Sensor Count with Optional Cabinet Temperature & Humidity Thermal Map: Additional 11
• Communications with Monitoring Appliance: RJ-45 jack to sensorProbe+ monitoring appliance sensor port using UTP CAT-5e/6 cable
• Maximum Cable Length (to Monitoring Appliance): Up to 32 feet (10 m) with approved low capacitance shielded cable or UTP
• sensorProbe+ monitoring appliance auto detects the presence of the ILPM sensor
• The ILPM sensor is only compatible with the sensorProbe+ platform units
• When plugging the first time or after upgrading a sensorProbe+ unit, the sensor's firmware might be upgraded by the unit and not be available right away
• On the sensorProbeX+, the sensor can be used only on the main module sensor ports

Inputs
1x sensor RJ45 Port
• Optionally Hard-Wired Inputs with the Following Plugs
- IEC 60320 C20 
- IEC 60320 C14 
- Nema 5-15P
- Nema 5-20P 
- Nema 5-30P 
- Nema L5-15P
- Nema L5-20P
- Nema L5-30P
- UK BS
- Shuko CEE 7/7 plug
- IEC60309 2P+E blue

Outputs
• Optionally Hard-Wired Outputs with the Following Outlet Types
- IEC 60320 C13 
- IEC 60320 C19 
- Nema 5-15R 
- Nema 5-20R 
- Nema 5-30R 
- Nema L5-20R
- Nema L5-30R
- UK BS1363
- Shuko CEE 7/3 Socket
- IEC 60309 2P+E Blue

Physical
• Dimensions: 170 x 85 x 52 mm
• Mounting: Keyhole mounting

Environment
• Temperature : -35~80°C
• Humidity: 20~80% (Non-Condensing)
• MTBF: 1,400,000 hours (based on field experience with sensorProbe units)