Copyright © 2020 KVMGalore® - All rights reserved.
Geist Watchdog WaterSnake Kits
Water-sensing cable system to surround a room's perimeter or encircle rows of racks, provides warning of water entry along the whole length
Read more below...
Protect a room or a data cabinet with a perimeter water-detection system
Surround the periphery of a room or encircle rows of data cabinets with this water-sensing cable that detects liquid along the whole length.
Put this cable around the periphery of your server room or around data cabinets and get early warning of water entry. Get an e-mail or page when water hits.
Detect moisture over a wide area. This cable detects the presence of water or other conductive liquid over its entire length.
Typically used to protect computer server rooms from water damage, Watchdog WaterSnake connects to a Watchdog monitoring appliance. When water is detected, the Watchdog climate monitor sends alerts by e-mail or SNMP trap.
The sensing cable (orange wire) attaches to the floor using small nylon J-clips. The sensing cable connects to the leader cable which attaches to the wall-mounted interface box. Signals from the interface box run to the Watchdog. A LED on the box provides a visual indication of system status.
The kits (available in 10- 40- 120- or 300-foot lengths for the detection cables) come with wall mounted control box. Uses two Watchdog I/O ports. Reports when the cable is wet, disconnected or faulty.
• Works with all Geist Watchdog climate/environmental monitors with analog ports
• Compatible with A2D interface (requires 2 A2Ds)