Copyright © 2024 KVMGalore® - All rights reserved.
sensorProbe2+ LCD
Environmental monitoring appliances with a built-in LCD display to show data from connected sensors, PoE, 2/4x sensor-ports 1x dry-contact I/O port and 1x UART modem port
Read more below...
1) sensorProbe2+ LCD Basic Model No. SP2+B-LCD Usually ships within three weeks or less
2) sensorProbe2+ LCD Modbus Pro Model No. SP2+LCD-MOD Usually ships within three weeks or less
3) sensorProbe2+ LCD Pro Model No. SP2+P-LCD Usually ships within three weeks or less
LCD environmental monitoring appliance
with PoE*, 2/4x sensor-ports for external sensors, 1x dry-contact I/O (or Modbus RS485) port and 1x UART modem port
sensorProbe2+ LCD Basic is a compact environmental monitoring appliance that comes with a built-in LCD display to show data from connected sensors, and with PoE** included as standard.
sensorProbe2+ LCD Basic comes equipped with 4x available intelligent sensor ports to connect a wide range of AKCP sensors, along with 1x dry-contact I/O port.
sensorProbe2+ LCD Basic comes comes with a basic set of software functions which can be upgraded through a software license to a Pro version (see listing below) to include support for IPv6 and SNMP v3, among others.
sensorProbe2+ LCD Basic allows you to connect external AKCP sensors such as temperature sensor, thermal map or water leak detection to its intelligent sensor ports. You may also connect the sensor splitter box with cabinet thermal maps and contactless current meter, and you have a complete monitoring solution for your rack.
sensorProbe2+ LCD Basic runs the same user interface as the rest of the sensorProbe+ product line, with all the same features such as IPv6, SNMP v3, Modbus TCP/IP, and up to 80 virtual sensors**.
sensorProbe2+ LCD Basic can be powered via dual AC or DC inputs, providing redundancy for powering the device. The 12-24VDC or 48-60VDC external power supplies feature dual DC inputs with a single 5VDC output for powering the sensorProbe2+ LCD Basic. Ideal for telecoms applications where DC power comes straight into the cabinets, or in a data center with dual PDUs. Utilize 2x 12VDC power adapters, one on each AC power source, connect them to the DCW024-5 with the output to the DC jack on the sensorProbe2+ LCD Basic. This can function as a redundant power source. Should the mainline power fail the sensorProbe2+ LCD Basic will switch to using the PoE as an alternative power source to the DC jack input.
Options (purchased separately - see listing below) may include:
• 4G Modem - External cellular data modem plugs into dedicated UART modem port
• External Power Adapter - Power the unit with external AC power supply, or use as a redundant power source with PoE
• 5 Dry-Contact Ports via Sensor Port - Add 5 dry contacts to an RJ45 sensor port
• Dry-Contact Cables - Connect an I/O dry-contact to an RJ45 sensor port
• EXP - Port that is compatible with CCU, E-Opto16 and E-Sensor8 expansion units, as well as doubling as a Modbus RS485 port for monitoring a generator, or other industrial equipment
• Modbus RS485 - Have a Modbus RS485 port instead of the standard dry-contact port (SP2+B-LCD-MOD)
sensorProbe2+ LCD Basic is manufactured using highly integrated, low power surface mount technology to ensure long term reliability.
* No power supply (PSU) is included - a power supply may optionally be purchased separately (see listing below)
** Requires Pro license