HDMI KVM over IP w/ PoE

Management of multi-server systems supporting HDMI displays in IT departments 

HDMI KVM over IP extenders with PoE allow HDMI and USB equipment to be connected up to 330 feet (100 m) over an Ethernet LAN, supporting HDMI up to 4K @ 60Hz (4:2:0) and 4K @ 30Hz (4:4:4) via CAT-5e/6 cable in multiple point-to-point and point-to-multipoint configurations.

The Transmitters and Receivers support PoE (PD) when used with a PoE (PSE) Ethernet switch.

Each Transmitters connects to a computer via HDMI and USB ports. Each Receiver terminates to an HDMI display, USB 1.1 keyboard and mouse, and two more USB 2.0 devices such as a printer, drawing pad, storage device, camera, etc., via a 2 port USB hub.

For KVM switching, KVM splitting and KVM matrix configurations, the Ethernet switch must have Gigabit ports, Jumbo Frame capability and DHCP Server capability. MuxLab recommends using the Cisco SG300-series managed switches.

In KVM switching configurations, a single Receiver can be switched via keyboard-hotkey sequences to any Transmitter on the network (supporting up to 16 computer-sources (via 16 Transmitters) to one Receiver). Alternatively, or for configurations larger than 16 Transmitters, an on-screen display (OSD) is used for switching. This allows a single operator to manage numerous servers/workstations in a distributed KVM application.

MuxLab ProDigital Network Controller (500812) is available to simplify the configuration and utilization of the 500770 and other MuxLab IP based products via an Ethernet web interface.

Need help with product selection?
Call KVMGalore at 1-800-636-3434, or submit your question on KVMGalore HelpCenter.