Copyright © 2019 KVMGalore® - All rights reserved.
29457: Extend HDMI video/audio and infrared (IR) signals up to 197 feet
at 4K video resolution using HDBaseT technology
The HDMI HDBaseT Lite over CAT-5 extender is a perfect solution for extending audio/video signals from a Blu-ray™ player to a projector.
This kit is certified by the HDBaseT Alliance and offers a complete solution for extending HDMI audio/video signals over a single CAT-5/5e/6 unshielded twisted pair cable up to 190 feet at a 4K resolution. This solution is compatible with any operating system and is truly plug and play with no drivers or software required.
HDBaseT Lite technology allows the Extended Display Identification Data (EDID) signals, i.e. communication of the display's capabilities to pass through the extension solution ensuring that the content from the source is sent at the optimal resolution for the display.
Support of IR control allows a device to be controlled at length. This allows a HDMI source device, such as a Blu-ray player, to be controlled over the extension solution.
Built-in power surge protection and high ground loop immunity ensure high performance signal extension.
Features and Benefits
• HDBaseT certified
• Extends HDMI A/V signals up to 190 feet
• Suports 3D video, HDCP, 4K resolution, EDID pass through, and IR control
• Utilizes a single CAT-5 cable for extension
• Kit includes both the transmitter and receiver units
• Warranty : 3 Years
Note: This solution includes two power adapters and both must be used for proper operation. One power adapter must be connected to the transmitter and one power adapter must be connected to the receiver.
Note: Shielded, solid conductor CAT-5e/6 cabling is recommended for applications where the CAT-5e/6 cable must be coiled, is run near other high-frequency signaling cables or in high EMI/RFI environments. For best performance use a CAT-6 solid shielded patch cable.