Video Resolutions
• 1600 x 1280 at distances up to 650 feet
• 1280 x 1024 at distances up to 1000 feet.

Extension distance
Up to 300 1000 feet using CATx (x=5, 5e, 6, 7).

Extension Technology
Differential analogue signalling for video signals.

Cable Equalisation
Finely adjustable cable equalisation amplifiers enable the video sharpness and brightness to be independently adjusted using the dials on the side of the receiver units.

Integral DeSkew
Skew compensation adjustments can be made using the two rotary dials on the AdderLink AV101R receiver unit. The first dial affects the relationship between green and blue colour signals, the second red and green. The cable skew is produced due to wire length differences between different twisted pairs in a CATx cable that arise due to the different twist rates used to reduce signalling cross talk. The amount of cable skew seen depends on the cable type used and the cable length. The AdderLink AV101R provides up to 62ns of DeSkew with a fine 2ns resolution. This means that high-resolution video can be accurately DeSkewed even at long cable distances. The DeSkew supports 300MHz bandwidths, which means that the DeSkew function does not adversely affect the video quality.

Indicators
The remote and local units are fitted with two indicators:
• Red shows the presence of power into the module
• Green indicates the presence of a video input.

Audio
Transmitted as digital signals to ensure high fidelity and low noise levels. Phase locked sampling clocks ensure that there are no unwanted clicks when no sound is being played.

Connectors
• 2 x blue 15-pin high-density D-type female connector for video output;
• 2 x light green 3.5mm audio jack for audio output;
• 1 x RJ45 connector for CATx cable connection from local unit;
• 1 X RJ45 connector for CATx cable connection to cascade to additional AdderLink AV 101R receiver units;
• 2.5mm DC jack for power adapter.

Physical
Metal case (steel and stainless steel), 3.858" x 3.74" x 0.984".

Power
• External 5V DC, 2A power supply with IEC power cable connection.
• Alternatively, 4 units can be powered using a 4amp power supply and the Adder "Squid" cable.
• Operating Voltage: 100-240VAC.
• Power Frequency: 50-60Hz.
• Power Usage: 5VDC at 500mA.
• Spike suppression: All AdderLink AV units are fitted with spike suppression circuits.

Display Data Channel
DDC signalling is supported to enable the computer to communicate with the local monitor and thus configure its video card for optimal operation.

Approvals
• FCC class A.
• CE marked.

Environment
• Temperature Tolerance: – 0-40°C (32 to 104°F).
• Humidity Tolerance: – 5 to 60% non-condensing.